separable connector /ZT-35kv/200A Load break Elbow Connector

1.cable joints/separable connector 2. 35KV/200A 3. EPDM 4. Loadbreak Elbow Connector 5. KEMA

Cable joints/cable acccessories/separable connector

The RU ZT-35/200 Loadbreak Elbow connector is a fully-shielded and insulated plug-in termination, rated 200 amps up to 35kV, connected with underground cable ranging from 25 to 120 mm2(conductor cross section). It's loadbreak probe with an ablative arc-follower tip provides dependable loadbreak switching characteristics.

The RU ZT-35/200 Loadbreak Elbows are molded using high quality peroxide-cured EPDM insulation. It is used to connect underground cable to transformers, switchgear and 200 amps junctions equipped with loadbreak bushings. The test point is available for use with hot line voltage indicators.

It is the essential component for high-voltage electrical connection of the pad-mounted transformers, submersible transformer and loadbreak junctions.

Electrical Characteristics:

Voltage Rating and Characteristics
Description	kv
Standard Voltage Class	35
Max Rating Phase to phase	40.5
Max Phase to ground	26
AC 50 Hz 1 minute Withstand	104
DC 15 minute Withstand	104
BIL and Full Wave Crest	200
15kv Partial Discharge	≤10PC
Current Ratings and Characteristics
Description	Amperes
Continuous	200A
Switching	10 operations at 200A, 14.4kv
Fault Closure	10kA
Short time	10kA rms symmetrical for 0.2s 3.5kA rms symmetrical for 3.0s
Electrical Characteristics are in accordance with or exceed GB/T 12706.4-2002, ANSI/IEE 386-1995, IEC 60502-4:1997

separable connector /ZT-35kv/200A Load break Elbow Connector